| Frequency Characteristics | |
| Frequency Range | 0.004Hz to 4MHz in 7 ranges | | Ranges | x1, x10x, x100, x1K, x10k, x100k, x1M | | Dial Accuracy | 5% of full scale | |
| |
| Waveforms | Sine, Square, Triangle, TTL Pulse | | High Output | Amplitude: 15mV to 10V （into 50?）
DC Offset: 0 to ±5 into 50?
Impedance: 50?
Attenuator: 30dB variable | | Low Output | Amplitude: 0 to 1V （into 50?）
DC Offset: 0 to ±0.5 （into 50?）
Impedance: 50?
Attenuator: 30dB variable | |
| |
| Frequency Range | 0.004Hz to 4MHz | | Flatness | ±2.0 % （0.004Hz to 400KHz）
±10% （400KHz to 4MHz） | | Harmonic Distortion | < 0.5 % on the 1K and 10K range
1% on the x1, x10, x 100 and x100K ranges
25dBc on the x1M range | |
| |
| Frequency Range | 0.004Hz to 4MHz | | Rise/Fall Time | < 50ns into 50? （High output terminals） | | Symmetry | ±1% to 100KHz
±5% to 4MHz | |
| |
| Linearity | > 99% to 200KHz | |
| |
| Modes | Operating modes （CW, Triggered, Gated, Sweep, Manually Triggered） | | Trigger/Gate Input Level | TTL | | Trigger/Gate Frequency Range | To 4MHz Max. | | Trigger/Gate Minimum Pulse Width | < 50ns | |
| |
| Type | Linear and Log | | Sweep Time | 30ms to 60 seconds continuously variable | | Sweep Width | 1:1,000 linear
1:10,000 log continuously variable
Sweep start and stop frequencies may be set with the Freq dial and the Freq. Stop control. | |
| |
| Sync | TTL level | | GCV | Output proportional to the selected frequency, 0 to -5V | | Sweep | 4V P-P | | Impedance | 600? | |
| |
| Input Voltage | 0 to ±4V P-P will cause a 1:1,000 frequency change （linear） and 1:10,000 （Log） | | Input Impedance | 2K? | |
| |
| Operating Temperature | 0 to 50°C （32 to 120°F） | | Size | 3.5" （H） x 11.4" （W） x 10.6" （D） | | Weight | 5 lbs | | AC Line Voltage | 120/220V, 50/60Hz | | Accessories | Manual, Line cord, BNC cable | |
主营产品：
进口仪器仪表
您的位置：
在线咨询
返回顶部